Powerkit.50 for HDR50 | export valve | Maximum power 11J

* Basically at least 16J+ are possible with our Powerkit.50. In order to be able to get a higher performance of 20-30J, it depends strongly on the ammunition you use and the right temperature !

Details | Improvement:

• no valve needed in the pressure chamber
• High-strength special aluminum - press the insert into the pressure chamber with an enclosed screw
• and take out the valve (throttle in the pressure chamber).
• Increases power to over 20 joules! *
• longer valve opening time, larger gas volume
• reduced cool down effect
• Valve pin made of stainless steel for better sliding and protection of the sealing ring

Installation can be undone at any time.

Recommendation:

Since Co2 is very temperature dependent, we recommend storing the Co2 capsules at room temperature, as the Co2 expands and the pressure increases!

Scope of delivery:

1x pressure chamber insert

1x valve pin (shortened again 2 mm)

Attention strong increase in performance! Not suitable for paintball. Only suitable for the 11 joules! ! !

The purchase and possession of this export valve is free, the installation is prohibited in Germany due to the increase in performance and leads to the loss of warranty claims.

On the part of UMAREX GmbH & Co KG. we are obliged to point out this warning to you as a customer! Homedefence-24 and UMAREX GmbH & Co. KG assume no liability!